Training Basic Drilling Engineering & Environmental Safe Drilling Practice-Oil and Gas Mining

The training will provide to facilitate the trainer to share his knowledge and experiences in basic concept of drilling and exploration. Facilitator will assist participants to know basic theoretical of oil, gas and geothermal drilling.

Materi:

  1. MN030.1.1 – Steps to drilling a well
  2. MN030.1.2 – Types of rigs
  3. MN030.1.3 – Rig Components
  4. MN030.1.4 – Rig Systems
  5. MN031.2.1 – Equations and Inflow Performance Relation ship Functions of Drilling/Completion
  6. MN031.2.2 – Fluids
  7. MN031.2.3 – Fluid Types
  8. MN031.2.4 – Fluid Models
  9. MN031.2.5 – Introduction to Rotary Viscometer
  10. MN031.2.6 – Other Testing Equipment
  11. MN031.2.7 – Objectives of Monitoring Fluids
  12. MN031.3.1 – General Equations and Concepts Diagnostic tests
  13. MN031.3.2 – Water based muds
  14. MN031.3.3 – Oil based muds
  15. MN031.3.4 – Additives
  16. MN031.3.5 – Mud handling system
  17. MN031.4.1 – Tubing DesignFunctions of cement
  18. MN031.4.2 – Cement Types
  19. MN031.4.3 – Cement Additives
  20. MN031.5.1 – Drill string
  21. MN031.5.2 – Casing and tubing
  22. MN031.5.3 – Casing classification
  23. MN031.5.4 – Stresses on casing
  24. MN031.5.5 – Casing setting depth
  25. MN031.5.6 – Burst and collapse calculations
  26. MN031.5.7 – Wellheads
  27. MN031.6.1 – Hydrostatics
  28. MN031.6.2 – Buoyancy
  29. MN031.6.3 – Flow through pipes and annuli
  30. MN031.6.4 – Flow path
  31. MN031.6.5 – Pressure loss calculations
  32. MN031.7.1 – Hydrostatics Bit Types
  33. MN031.7.2 – Bit Parts
  34. MN031.7.3 – Bit Classification
  35. MN031.7.4 – Bit Nozzles
  36. MN031.8.1 – Hydrostatics Definitions
  37. MN031.8.2 – Causes of kicks
  38. MN031.8.3 – Kick indicators
  39. MN031.8.4 – Shut-in procedure
  40. MN031.8.5 – Well Kill Procedures
  41. MN031.9.1 – Reasons for directional wells
  42. MN031.9.2 – Planning Trajectory
  43. MN031.9.3 – Kickoff Methods
  44. MN031.9.4 – Survey Methods
  45. MN031.9.5 – Survey Calculations
  46. MN031.9.6 – Hole Assemblies

WHO SHOULD ATTEND THIS TRAINING:
Engineer /Instansi / Mahasiswa / Pelajar jurusan Teknik Geologi, Teknik Pertambangan, Teknik Geodesi, Teknik Sipil.

Durasi:
3 Day

WAKTU & TEMPAT:
Batch1 25-27 JANUARI – YOGYAKARTA
Batch2 22-24 FEBRUARI – YOGYAKARTA
Batch3 21 – 23 MARET – YOGYAKARTA
Batch4 18 – 20 APRIL YOGYAKARTA
Batch5 23 – 25 MEI – YOGYAKARTA
Batch6 20 – 22 JUNI – YOGYAKARTA
Batch7 18 – 20 JULI – YOGYAKARTA
Batch8 22 – 24 AGUSTUS – YOGYAKARTA
Batch9 19 – 21 SEPTEMBER – YOGYAKARTA
Batch10 17 – 19 OKTOBER – YOGYAKARTA
Batch11 21 – 23 NOVEMBER – YOGYAKARTA
Batch12 19 – 21 DESEMBER – YOGYAKARTA

Inhouse training: Depend on request

Available by request in other cities such as : Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak

METODE:

  1. Presentasi
  2. Diskusi Interactive
  3. Praktikum Lapangan
  4. Evaluasi

INSTRUKTOR:
Didukung oleh perusahaan dan akademi kependidikan khususnya dibidang mining maupun surveying, kami menghadirkan pemateri dan instruktur berpengalaman baik dari praktisi atau akademisi

  • PT. Eroksa Graha Teknika
  • Akademisi Teknik Geodesi UGM Yogyakarta
  • Akademisi STPN Yogyakarta

INVESTASI:
Rp 7.000.000,- /participant (non residensial)*

Group Rate:
Rp 6.500.000,- /participant (min 4 participants from the same company)

FASILITY:

  1. Certificate
  2. Well experiented trainer
  3. Complete training handbook
  4. Training Kit, Training Photo & Exclusive Souvenir
  5. Coffe Break & Lunch
  6. City Tour (Eduwisata pacage)
  7. Airport/ railway pick up services to hotel and from hotel to the training venue (min 2 participants from the same company)
Scroll to Top